Phone orders accepted 24/7
Voice 1-866-961-9801
Fax 1-866-400-4565


Click here to email us

Search our site                   
 
             
Accessories
Chemicals
Cleaning
Hard Surface
Portables
Restoration
Sprayers
Wands & Tools
               
               
Select a category of equipment from the list below

 

Restoration Equipment

Air King

AC081

Air King
The Right Tool for the Job!
Pivoting Utility Blower!

Sometimes you need a sledgehammer and sometimes a framing hammer. It’s the same when it comes to air movers!

The three-speed Air King fits a perfect niche when you need to direct airflow into small areas such as closets, bathrooms, inside cabinets, crawl spaces, etc. It’s also perfect for drying furniture, mattresses and other contents.

The Air King is extremely versatile with an infinite number of blower head positions and very low amp draw so as many as 18 blowers can operate off a single 15 amp circuit! Simply plug one blower into the wall, then string more blowers - one plugged into another! The Air King delivers 1220FPM on high, 1025FPM on medium and 768FPM on low.

* Maximum air velocity! Air King is still pushing air 50 feet from the unit!
* Direct air where needed with an infinite number of blower head positions
* Speed dry upholstery and carpet after cleaning or when spotting
* Flash dry hard surfaces after cleaning and mopping, or when applying floor finishes
* Use to cool you while working in the heat
* Plug other electrical tools directly into the Air King
* Flood restoration! Low amps+high air velocity+small size = quick structural drying!
* Rugged, easy to carry handle

Dri-Eaz Dragon X2 Mobile Furnace

AC37

Dri-Eaz Dragon X2 Mobile Furnace
Dragon X2
Mobile Furnace

The Dragon X2 Mobile Furnace is a 100,000 BTU indirect fired furnace providing heated air for water damage restoration, structural drying, construction, event shelters and other temporary heating applications. The indirect fired design keeps combustion air separate from heated air and allows the Dragon to heat air without adding any moisture, fumes or smoke.

Introducing heat to the drying environment can greatly increase drying efficiency. The added heat from the Dragon will increase the rate of evaporation by decreasing the relative humidity of the affected area. Raising the temperature of a drying area with the Dragon from 60° to 70°F can increase the evaporative potential of your existing drying system up to 45 percent.
Applications:
# Water damage restoration
# New construction drying
# Unheated jobsites
# Temporary event shelters
# Workshops, storage rooms, and warehouses
# Greenhouses and polyurethane tunnels for agriculture
# Any situation calling for clean, dry temporary heat

Octi-Dry for Air Movers

AC511

Octi-Dry for Air Movers
Octi-Dry

When water damage occurs and saturates the wall structure, fast drying is essential. Octi-Dry forces warm air through the wall structure, directing it where it is needed most. This results in more thorough structural drying.

Octi-Dry works so quickly that in most cases you can avoid major disruption of the customer's home or business. A proven history of QUICK RESPONSE and proper drying, helps to limit the effects of secondary damage, which can meet or exceed that of the original water intrusion.

There are two versions: AC511 Standard Octi-Dry for use with ordinary air movers, and AC512 TES Octi-Dry designed specifically for use with TEX units as part of the TES drying system.

The ports are 1" in diameter. You insert them into the wall cavity.

Octi-Dry is designed (notice the Velcro on the ends) to be used in series. You can put five or more units on a single airmover. One VERY nice feature is the fabric material. You can fold it into a small package for storage (about the size of a one-gallon box).

If you've already seen Octi-Dry, it may be time to take another look. The manufacturers have redesigned it over the years to fine tune it more and more. It has become the finest wall drying system on the market.

Octi-Dry for TEX or E-TES

AC512

Octi-Dry for TEX or E-TES
Octi-Dry

When water damage occurs and saturates the wall structure, fast drying is essential. Octi-Dry forces warm air through the wall structure, directing it where it is needed most. This results in more thorough structural drying.

Octi-Dry works so quickly that in most cases you can avoid major disruption of the customer's home or business. A proven history of QUICK RESPONSE and proper drying, helps to limit the effects of secondary damage, which can meet or exceed that of the original water intrusion.

There are two versions: AC511 Standard Octi-Dry for use with ordinary air movers, and AC512 TES Octi-Dry designed specifically for use with TEX units as part of the TES drying system.

The ports are 1" in diameter. You insert them into the wall cavity.

Octi-Dry is designed (notice the Velcro on the ends) to be used in series. You can put five or more units on a single airmover. One VERY nice feature is the fabric material. You can fold it into a small package for storage (about the size of a one-gallon box).

If you've already seen Octi-Dry, it may be time to take another look. The manufacturers have redesigned it over the years to fine tune it more and more. It has become the finest wall drying system on the market.

3M FILTRETE HAF FILTER FOR LGR 2400

AC51A

3M FILTRETE HAF FILTER FOR LGR 2400
3M™ HAF (High Air Flow) Filters

3M™ HAF (High Air Flow) filters are standard on the Evolution LGR, DrizAir 1200, LGR 2000, and LGR 2400 dehumidifiers. There's a HAF filter that fits every current Dri-Eaz refrigerant dehumidifier.

Dri-Eaz Evolution LGR Dehumidifier

AC52

Dri-Eaz Evolution LGR Dehumidifier
Evolution® LGR

Low Grain Refrigerant Dehumidifier

The Evolution is the first dehumidifier to pack premier, low grain refrigerant (LGR) technology into a compact design. Built for today's trained restoration professional, the Evolution also encompasses the most user-friendly features. So versatile and easy to handle that you'll want to use it on every job!

* LGR technology
* Compact size - only 92 pounds
* Draws only 5 amps
* Quick pump access
* New, rigid fold-down handle
* Improved quick-release hose wrap design
* Built-in ring for easy attachment of ducting

3M FILTRETE HAF FILTER FOR EVOLUTION LGR

AC52A

3M FILTRETE HAF FILTER FOR EVOLUTION LGR
3M™ HAF (High Air Flow) Filters

3M™ HAF (High Air Flow) filters are standard on the Evolution LGR, DrizAir 1200, LGR 2000, and LGR 2400 dehumidifiers. There's a HAF filter that fits every current Dri-Eaz refrigerant dehumidifier.

3M FILTRETE HAF FILTER FOR LGR 2000

AC54A

3M FILTRETE HAF FILTER FOR LGR 2000
3M™ HAF (High Air Flow) Filters

3M™ HAF (High Air Flow) filters are standard on the Evolution LGR, DrizAir 1200, LGR 2000, and LGR 2400 dehumidifiers. There's a HAF filter that fits every current Dri-Eaz refrigerant dehumidifier.

DRI-EAZ DRI-FORCE ULTRACLEAN HEPA FILTER

AC57

DRI-EAZ DRI-FORCE ULTRACLEAN HEPA FILTER
Attaches to the output side of the Driforce. It is the state
of the art filtration method for cleaner, healthier air.

ACCESSORIES:

AC58 - DRIFORCE INTERAIR DRYING SYST.
AC581 - RESCUE MAT SYSTEM
AC582 - RESCUE MAT PANELS (SET)
AC600 - DRYER AIR WOLF 115V
AC602 - WOLFPACK FLOOR DRYING SYSTEM

DRI-EAZ DRI-FORCE INTERAIR DRYING SYSTEM

AC58

DRI-EAZ DRI-FORCE INTERAIR DRYING SYSTEM
DriForce®

InterAir Drying System™

For Drying Walls Without Damage. The DriForce forces high-pressure air into wet walls for wall drying with minimal disruption. You only need to make tiny 1/4-inch holes at baseboard level to introduce 60 inches of static pressure from the DriForce! It's perfect for hard-to-reach areas like behind cabinets, tubs, under stairwells, etc.

* Force air in or vacuum air out
* Dry up to 90 linear feet of wall
* Up to 60 inches of static pressure!
* Averages just 3 amps
* Fits in two convenient carrying cases

Complete System includes:

* 1 DriForce Airmover
* 13 7-foot ADS Hoses w/ Cuffs
* 8 Manifolds
* 1 400-foot PVC Tubing
* 100 1/4" Injector Nozzles
* 4 Manifold End Caps
* 5 Coupler Fittings
* 2 T-Fittings
* 25 Tube Extender Connectors
* 1 Muffler
* 2 Wheeled Duffel Bags

DRI-EAZ RESCUE MAT SYSTEM

AC581

DRI-EAZ RESCUE MAT SYSTEM
Rescue Mat System

Set up easily & work fast!

Dry out water-damaged hardwoods from above! The Rescue Mat System uses the power of a high-pressure blower like the DriForce to vacuum water vapor right through the surface of the floor. Two different sizes make it easy to custom fit your Rescue Mat System to any floor layout.

* Setup is fast and simple with just one hose connection per mat
* Two separate sizes for mix-and-match versatility
* No taping necessary! Gasket-edge provides a powerful seal
* An ideal complement to the Airwolf/WolfPack

Complete system includes:
4 - 46" x 30" mats
2 - 23" x 30" mats
3 - 7' hose with cuffs
2 - Connector sleeves
6 - Hose cuffs
5 - Tee-connectors
1 - Gasket roll
*DriForce Airmover sold separately.

DRI-EAZ RESCUE MAT SYSTEM

AC582

DRI-EAZ RESCUE MAT SYSTEM
Rescue Mat System - Mats Only

Set up easily & work fast!

Dry out water-damaged hardwoods from above! The Rescue Mat System uses the power of a high-pressure blower like the DriForce to vacuum water vapor right through the surface of the floor. Two different sizes make it easy to custom fit your Rescue Mat System to any floor layout.

* Setup is fast and simple with just one hose connection per mat
* Two separate sizes for mix-and-match versatility
* No taping necessary! Gasket-edge provides a powerful seal
* An ideal complement to the Airwolf/WolfPack

Rescue Mats Only

Dri-Eaz AirWolf Dryer

AC600

Dri-Eaz AirWolf Dryer
AirWolf

*Blower Only

Dry Hardwoods Fast!
The AirWolf uses an unbeatable combination of CFM and static pressure to literally force water out of damaged hardwood floors. The WolfPack system directs the high-velocity airflow of the AirWolf into the flutes between the flooring and the subfloor. This way the floor actually dries from the bottom out.

Avoid Refinishing Costs
The AirWolf/WolfPack can dry out a hardwood floor in as little as 3 days! By drying fast from beneath, the AirWolf/WolfPack system can help reduce or eliminate cupping and associated refinishing costs. This means no sanding! Now that's a valuable service to offer your customers.

* The world's best hardwood floor drying system
* Up to 800 CFM and 7.75" of static pressure
* Powerful 1.0 hp motor
* Stack the AirWolf for storage
* Carrying case included for WolfPack attachments

Dri-Eaz WolfPack Attachment - AirWolf/WolfPack Floor System

AC602

Dri-Eaz WolfPack Attachment - AirWolf/WolfPack Floor System
WolfPack Attachment

For the AirWolf/WolfPack Hardwood Floor Drying System

Dry Hardwoods Fast!
Connect the WolfPack attachment to your AirWolf airmover to complete the ultimate hardwood floor drying system.

* WolfPack Attachment Includes:3 - TurboVents
* 4 - Ducting: 2.5 ft x 4"
* 1 - Ducting w/ AirWolf Boot: 4 ft x 4"
* 1 - T-Joint: 4" x 4" x 4"
* 1 - Coupling: 4" x 4"
* 6 - L-Channel Diverters
* 1 - Dehumidifier Inlet Adapter
* 2 - Metal Duct Clamps
* 1 - Poly Foam Gasket: 10 ft
* 1 - Wheeled Duffel Bag

DRI-EAZ ACE TURBODRYER F259

AC603

DRI-EAZ ACE TURBODRYER F259
Ace TurboDryer®

All-around efficiency for any job.

Looking for an airmover that offers the most CFM per circuit of any airmover on the market? Look no further, it's called the Ace!

7-Position Versatility
Unique 7-position versatility of the Ace means you can use it on a wider variety of work than ever before. Use the Ace on drywall, hardwood floors, sub-floors, baseboards, ceilings, or any type of building material to dry without cutting, removing or replacing.

Ventilate Crawlspaces
Easily ventilate crawlspace with the Ace. It can be used to pull air out of crawlspaces and establish a negative pressure. The negative pressure will draw clean, heated air from other parts of the structure into the crawlspace for drying while preventing contaminants from being forced into other clean areas of the structure.

* Ace TurboDryer® Benefits:Incredibly low amp draw
* Seven position versatility for handling a wide range of applications
* Dry structures fast with 2000 Actual CFM
* Turn or tilt on non-skid rubber feet to switch operating positions
* Compact design that's stackable for operation and storage
* Ideal for structural drying, carpet cleaning, ventilation and more!

Dri-Eaz Studebaker AirPath

AC611

Dri-Eaz Studebaker AirPath
Studebaker AirPath™

NEW - Dry all floors in minutes.

Now you can dry carpets and hard surface floors using the same unit! The new innovative AirPath includes locking wheel casters to keep the unit firmly in place when drying hard surface floors plus legendary Dri-Eaz durability in a new rugged roto-molded design.

The new AirPath still dries carpets fast with its aggressive patented 360° air stream, but it now offers so much more. Simply engage the locks on each wheel for a solid grip for high velocity tile, vinyl or hard-wood floor drying. Or turn the unit on its side to dry stairs, thanks to new rubber-tipped feet built into the side of the rotomolded shell.

It draws warmer, drier air from above, blows it down and across the entire carpeted surface for the fastest drying and quick turnaround. Dry one room while the next one's being cleaned!

* Studebaker AirPath™ Benefits:Uniformly directs air across floor
* High velocity 40 mph airflow
* Patented 360° outlet grill design
* 1HP Motor with 2-speed switch
* Highly portable with locking wheel casters
* Stackable rotomolded housing

Dri-Eaz Jet CXV TurboDryer® - 3200 CFM

AC661

Dri-Eaz Jet CXV TurboDryer® - 3200 CFM
Jet CXV TurboDryer®

Streamlined for high velocity, fast drying and cleanup.

Aerodynamically designed for the highest velocity airflow at 3200 CFM - the Jet's built-in angles maximize laminar airflow along the floor. Its focused vanes channel extra velocity in all the right places and the unit's hinged design offsets from the wall for optimizing the fastest wall and floor drying.

Along with powerful airflow and minimal amp draw, the Jet is significantly quieter thanks to the unit's double-walled construction. Its convertible hinge gives one-step access for cleaning all components by just removing two screws.

Quick stackability on the Unimover handtruck - make the transport of multiple Jets as easy as 1, 2, 3.

The Jet CXV TurboDryer brings you:

* Low amps - 1.5, 2.0 and 3 amp speeds
* Directed high-velocity airflow - up to 3200 CFM
* Daisy-chain up to 8 units (on low speed) using convenient onboard outlet
* Run 200 feet without an extension cord
* Built in stand and non-skid rubber feet for safely drying face down
* Quick convertible access for cleaning components
* Easy stacking for storage and transport on the Unimover handtruck
* Microban® antimicrobial product protection
* Dri-Eaz legendary durability & reliability

Dri-Eaz TurboVent - InterAir Drying System

AC69A

Dri-Eaz TurboVent - InterAir Drying System
TurboVent®

InterAir Drying System™

Attach the TurboVent to your Sahara HD or previous Sahara Pro-HP TurboDryer and force air into difficult-to-dry areas like cabinets, cupboards and walls.

* Complete system includes:1 - Snout Adapter Assembly
* 1 - 50-ft Length of 4" Vinyl Ducting
* 3 - Mini TurboVents
* 5 - Vinyl Duct Caps
* 9 - Metal Duct Clamps
* 1 - Wheeled Duffel Bag

Dri-Eaz TurboVent 48 - InterAir Drying System

AC69D

Dri-Eaz TurboVent 48 - InterAir Drying System
TurboVent® 48"

InterAir Drying System™

Dry walls with the power of a Sahara HD or previous Sahara Pro-HP TurboDryer®. Attach the TurboVent 48 directly to the snout to deliver a 48" wide column of air. Ideal for drying wet wall and ceiling cavities.

* Complete system includes:1 - One 48" TurboVent
* 1 - One 24" Shock Cord w/hook ends

Dri-Eaz Vortex Axial Fan

AC73

Dri-Eaz Vortex Axial Fan
Vortex Axial Fan

Works Great with Sto & Go Ducting!

This Dri-Eaz airmover will ventilate confined spaces through up to 125 feet of Sto & Go ducting. The Vortex uses a 12" axial fan blade to pull musty air out or propel fresh air in to inaccessible areas. It's also an ideal choice for drying large open areas like gyms, concrete pads, hallways, etc.

* Vortex Axial Fan Benefits:Powerful 1.0 hp motor
* Built-in handle
* Stackable for storage!
* Operate standalone or with Sto & Go ducting

3M FILTRETE HAF FILTER FOR DRI-EAZ DRIZAIR 80DX DEHUMIDIFIER

AC76C

3M FILTRETE HAF FILTER FOR DRI-EAZ DRIZAIR 80DX DEHUMIDIFIER
Standard on the new Evolution LGR and all DrizAir dehumidifiers. Reorder to keep your dehumidifiers running in top condition! HAF filter media captures more particles and is more efficient than other materials. Vacuum twice before replacing.
DRI-EAZ DRIZAIR 1200 DEHUMIDIFIER

AC84

DRI-EAZ DRIZAIR 1200 DEHUMIDIFIER
DrizAir® 1200
Refrigerant Dehumidifier
The DrizAir 1200 dehumidifier has all the convenient features of its larger cousins in a compact and extremely portable size. A proven favorite of water damage restoration professionals!

* Removes up to 15 gallons a day
* Super convenient size
* Hot-gas bypass for fast defrost
* Rugged rotomolded housing
* Electronic touch-pad controls
* Rigid handle-designed for stacking
* Semi-pneumatic wheels for easy transport
* Built-in ring for easy attachment of ducting

3M FILTRETE HAF FILTER FOR DRIZAIR 1200 DEHUMIDIFIER

AC84A

3M FILTRETE HAF FILTER FOR DRIZAIR 1200 DEHUMIDIFIER
3M™ HAF (High Air Flow) Filters

3M™ HAF (High Air Flow) filters are standard on the Evolution LGR, DrizAir 1200, LGR 2000, and LGR 2400 dehumidifiers. There's a HAF filter that fits every current Dri-Eaz refrigerant dehumidifier.

KOOL Tape - 20' Roll (uncoated)

AK088

KOOL Tape - 20' Roll (uncoated)
Kool Tape - For use with KoolGlide Carpet Seaming Tool - an entirely new way to seam carpet! There's no carpet damage due to heat, there is no odor; there is great adhesion and it's simple to learn and use!

(For use with KoolGlide Carpet Seaming Tool, Item No. AK086)

Imagine:

* Clean, fast adhesion at the push of a button
* Bonding on demand in seconds
* No smoke, no carpet damage or discoloration
* A powerful bond that can be removed minutes or years later, for easy repair or on-site rework

The KoolGlide and Kool Tape system melts adhesive using a pre-programmed heating cycle, controlled by a state-of-the-art microprocessor. Precise amounts of adhesive and tightly controlled heating provide for a consistent low-profile seam.

* No waiting for the tool to heat up
* The tool never gets hot, so there's no danger of burns to the operator
* The tool never touches the adhesive, so there's no messy cleanup
* No fumes in the operator's face
* No carpet discoloration

VAPORTEK OPTIMUM 4000 DEODORIZING MACHINE

AR40

VAPORTEK OPTIMUM 4000 DEODORIZING MACHINE
Compact electric unit treats areas up to 20,000 cu. ft. Uses replaceable 90-day or 120-day cartridges, sold separately. 110 volt.

ACCESSORIES:

AR48B - VAPORTEK CTRDGE BERRY OPTIMUM 4000
AR48C - VAPORTEK CTRDGE LEMON OPTIMUM 4000
AR48D - VAPORTEK CTRDGE ORCHARD OPTIMUM 4000
AR48E - VAPORTEK CTRDGE FOREST OPTIMUM 4000

Accessories - Chemicals - Cleaning - Hard Surface - Portables - Restoration - Sprayers - Wands / Tools

 
Home - Contact Us
 
©2011 Emerald Coast Restoration Supply, LLC
3004 Minnesota Avenue
Lynn Haven, FL 32444
(850)563-2104 Fax (850)563-1695