Phone orders accepted 24/7
Voice 1-866-961-9801
Fax 1-866-400-4565


Click here to email us

Search our site                   
 
             
Accessories
Chemicals
Cleaning
Hard Surface
Portables
Restoration
Sprayers
Wands & Tools
               
               
Select a category of equipment from the list below

 

Rotary Equipment

HIGH SPEED RX20

MH20A

HIGH SPEED RX20
The amazing RX-20 Rotary Jet Extractor has revolutionized the way carpets are cleaned!!!

With 5 spray jets matched with 5 vacuum slots, the RX-20 makes over 650 cleaning passes per minute! This super agitation, combined with the unit's weight, deeply cleans, extracting soil and cleaning solution.

The RX-20 Hard Floor Head opens new possibilities for your cleaning operation.
You can clean a homeowner's tile floor or concrete with high pressure and get the agitation of a brush all in one head!

Brush heads operate up to 1,000 psi and contain 3 jets and 5 vacuum tubes. Now you can spray, brush, and extract all in one operation!

PAD DRIVER RX-20 BONNET

MH20D

PAD DRIVER RX-20 BONNET
Allows the RX-20(MH20A) to be used for bonneting. 
ROTARY FLOOR MACHINE

MH44

ROTARY FLOOR MACHINE
Dependable: This is the machine that can last for generations. Provides years of trouble free service. One-year warranty for all non-wearing parts.

Powerful: High torque 1 1/2 HP motors provide enough power (175 r.p.m.) for the toughest jobs.

Durable: Powder coated and highly polished finishes for lasting quality. Switch control lever constructed of cast aluminum alloy.

Versatile: Fully adjustable handle for comfort of every operator. Made for bonneting, scrubbing, polishing and shampooing (with optional shampoo tank).

Safe: Has a safety lock and is UL approved.

RX HARD FLOOR ATTACHMENT LD LIGHT DUTY

MH20E

RX HARD FLOOR ATTACHMENT LD LIGHT DUTY
RX-20(MH20A) Hard Floor Brushes for light duty

Suitable for Light Duty (LD) to medium duty cleaning of stone, slate, terrazzo, tile or sealed concrete floors. The brush area is tufted with blue .022 nylon fiber impregnated with 120-grit silicon carbide. 15" Diameter block, Five (5) vacuum pick-up tubes and Three (3) #2 S/S high-pressure solution jets. The brush on this attachment replaces red pads and blue pads.

RX HARD FLOOR ATTACHMENT MD MEDIUM DUTY

MH20F

RX HARD FLOOR ATTACHMENT MD MEDIUM DUTY
RX-20(MH20A) Hard Floor Brushes for medium duty

Suitable for Medium Duty (MD) cleaning of stone, slate, terrazzo, tile or concrete floors. This attachment is also ideal for one-step stripping of resilient floors. The brush area is tufted with green .050 nylon fiber impregnated with 80-grit silicon carbide. 15" Diameter block, Five (5) vacuum pick-up tubes and Three (3) #2 S/S high- pressure solution jets. The brush on this attachment replaces brown and black pads and will outlast them more than 100 to 1.

 

MH20G

RX HARD FLOOR ATTACHMENT HD HEAVY DUTY
RX-20(MH20A) Hard Floor Brushes for heavy duty

Designed for Heavy Duty (HD) and aggressive scrubbing of concrete and aggressive stripping of resilient floors. The brush area is tufted with blue .060 nylon fiber impregnated with 46-grit silicon carbide. 15" Diameter block, Five (5) vacuum pick-up tubes and Three (3) #2 S/S high- pressure solution jets. The brush on this attachment replaces high productivity pads.

PAD DRIVER, 13

AC913

PAD DRIVER, 13" PAD DRIVER VERSA PRO FLOOR MACHINE
For Bonnet Cleaning and VCT Floor Care

Match the pad driver to the apron you'd like touse for the job. Then add the appropriate bonnet or floor pad for the job.

AC913 - 13" Pad Driver
AC913 - 15" Pad Driver
AC913 - 17" Pad Driver
AC913 - 19" Pad Driver
AC913 - 21" Pad Driver

APRON WITH BUMPER 13

AC913A

APRON WITH BUMPER 13" VERSA PRO FLOOR MACHINE
The Key to the VersaPro’s Versatility!

The key to the VersaPro’s ingenuity is the different apron sizes offered. Rather than buy one rotary machine in each size, all you have to do is a simple change of the apron on the VersaPro to get the cleaning path that you need for the job. All aprons come with non-marking full wrap bumpers.


AC913 - 13" Apron with Bumper
AC913 - 15" Apron with Bumper
AC913 - 17" Apron with Bumper
AC913 - 19" Apron with Bumper
AC913 - 21" Apron with Bumper

BRUSH 11

AC913B

BRUSH 11"CARPET DELUXE W/PLATE FOR 13" MACHINE
This 11-inch carpet brush fits the 13-inch head for VersaPro. The clutch plate is included. This brush lasts longer than average machine brushes because it has an outer row of .028" nylon bristles supporting inner rows of .022" nylon cleaning bristles. That means these bristles resist "permanent bend" longer.

For best results, season this brush for a few minutes on concrete before using it on carpet.

BRUSH 11

AC913C

BRUSH 11" TILE NYLON W/PLATE FOR 13" MACHINE
This 11-inch tile-scrubbing brush fits the 13-inch head for VersaPro. The clutch plate is included. Use this brush for mild to medium aggressive scrubbing of resilient floors, non-slip flooring, terrazzo, quarry tile, and concrete. It has irregular bristle lengths to assure cleaning on uneven surfaces. The bristles are rust-colored .022" DuPont Tynex A nylon fibers impregnated with 120 silicon carbide. This brush replaces the old red and blue pads. 5/8" riser included.
PAD DRIVER, 15

AC915

PAD DRIVER, 15" PAD DRIVER VERSA PRO FLOOR MACHINE
For Bonnet Cleaning and VCT Floor Care

Match the pad driver to the apron you'd like to use for the job. Then add the appropriate bonnet or floor pad for the job.

AC913 - 13" Pad Driver
AC913 - 15" Pad Driver
AC913 - 17" Pad Driver
AC913 - 19" Pad Driver
AC913 - 21" Pad Driver

APRON WITH BUMPER 15

AC915A

APRON WITH BUMPER 15" VERSA PRO FLOOR MACHINE
The Key to the VersaPro’s Versatility!

The key to the VersaPro’s ingenuity is the different apron sizes offered. Rather than buy one rotary machine in each size, all you have to do is a simple change of the apron on the VersaPro to get the cleaning path that you need for the job. All aprons come with non-marking full wrap bumpers.


AC913 - 13" Apron with Bumper
AC913 - 15" Apron with Bumper
AC913 - 17" Apron with Bumper
AC913 - 19" Apron with Bumper
AC913 - 21" Apron with Bumper

BRUSH 13

AC915B

BRUSH 13" CARPET DELUX W/PLATE FOR 15" MACHINE
This 13-inch carpet brush fits the 15-inch head for VersaPro. The clutch plate is included. This brush lasts longer than average machine brushes because it has an outer row of .028" nylon bristles supporting inner rows of .022" nylon cleaning bristles. That means these bristles resist "permanent bend" longer.

For best results, season this brush for a few minutes on concrete before using it on carpet.

BRUSH 13

AC915C

BRUSH 13" TILE NYLON W/PLATE FOR 15" MACHINE (W/ GRIT)
This 13-inch tile-scrubbing brush fits the 15-inch head for VersaPro. The clutch plate is included. Use this brush for mild to medium aggressive scrubbing of resilient floors, non-slip flooring, terrazzo, quarry tile, and concrete. It has irregular bristle lengths to assure cleaning on uneven surfaces. The bristles are rust-colored .022" DuPont Tynex A nylon fibers impregnated with 120 silicon carbide. This brush replaces the old red and blue pads. 5/8" riser included.
PAD DRIVER, 17

AC917

PAD DRIVER, 17" PAD DRIVER VERSA PRO FLOOR MACHINE
For Bonnet Cleaning and VCT Floor Care

Match the pad driver to the apron you'd like to use for the job. Then add the appropriate bonnet or floor pad for the job.

AC913 - 13" Pad Driver
AC913 - 15" Pad Driver
AC913 - 17" Pad Driver
AC913 - 19" Pad Driver
AC913 - 21" Pad Driver

APRON WITH BUMPER 17

AC917A

APRON WITH BUMPER 17" VERSA PRO FLOOR MACHINE
he Key to the VersaPro’s Versatility!

The key to the VersaPro’s ingenuity is the different apron sizes offered. Rather than buy one rotary machine in each size, all you have to do is a simple change of the apron on the VersaPro to get the cleaning path that you need for the job. All aprons come with non-marking full wrap bumpers.


AC913 - 13" Apron with Bumper
AC913 - 15" Apron with Bumper
AC913 - 17" Apron with Bumper
AC913 - 19" Apron with Bumper
AC913 - 21" Apron with Bumper

BRUSH 15

AC917B

BRUSH 15" CARPET DELUX W/PLATE FOR 17" MACHINE
This 15-inch carpet brush fits the 17-inch head for VersaPro. The clutch plate is included. This brush lasts longer than average machine brushes because it has an outer row of .028" nylon bristles supporting inner rows of .022" nylon cleaning bristles. That means these bristles resist "permanent bend" longer.

For best results, season this brush for a few minutes on concrete before using it on carpet.

BRUSH 15

AC917C

BRUSH 15" TILE NYLON W/PLATE FOR 17" MACHINE
This 15-inch tile-scrubbing brush fits the 17-inch head for VersaPro. The clutch plate is included. Use this brush for mild to medium aggressive scrubbing of resilient floors, non-slip flooring, terrazzo, quarry tile, and concrete. It has irregular bristle lengths to assure cleaning on uneven surfaces. The bristles are rust-colored .022" DuPont Tynex A nylon fibers impregnated with 120 silicon carbide. This brush replaces the old red and blue pads. 5/8" riser included.
PAD DRIVER, 19

AC919

PAD DRIVER, 19" PAD DRIVER VERSA PRO FLOOR MACHINE
For Bonnet Cleaning and VCT Floor Care

Match the pad driver to the apron you'd like touse for the job. Then add the appropriate bonnet or floor pad for the job.

AC913 - 13" Pad Driver
AC913 - 15" Pad Driver
AC913 - 17" Pad Driver
AC913 - 19" Pad Driver
AC913 - 21" Pad Driver

APRON WITH BUMPER 19

AC919A

APRON WITH BUMPER 19" VERSA PRO FLOOR MACHINE
he Key to the VersaPro’s Versatility!

The key to the VersaPro’s ingenuity is the different apron sizes offered. Rather than buy one rotary machine in each size, all you have to do is a simple change of the apron on the VersaPro to get the cleaning path that you need for the job. All aprons come with non-marking full wrap bumpers.


AC913 - 13" Apron with Bumper
AC913 - 15" Apron with Bumper
AC913 - 17" Apron with Bumper
AC913 - 19" Apron with Bumper
AC913 - 21" Apron with Bumper

BRUSH 17

AC919B

BRUSH 17" CARPET DELUX W/PLATE FITS 19" MACHINE
This 17-inch carpet brush fits the 19-inch head for VersaPro. The clutch plate is included. This brush lasts longer than average machine brushes because it has an outer row of .028" nylon bristles supporting inner rows of .022" nylon cleaning bristles. That means these bristles resist "permanent bend" longer.

For best results, season this brush for a few minutes on concrete before using it on carpet.

BRUSH 17

AC919C

BRUSH 17" TILE NYLON W/PLATE FOR 19" MACHINE
This 17-inch tile-scrubbing brush fits the 19-inch head for VersaPro. The clutch plate is included. Use this brush for mild to medium aggressive scrubbing of resilient floors, non-slip flooring, terrazzo, quarry tile, and concrete. It has irregular bristle lengths to assure cleaning on uneven surfaces. The bristles are rust-colored .022" DuPont Tynex A nylon fibers impregnated with 120 silicon carbide. This brush replaces the old red and blue pads. 5/8" riser included.
PAD DRIVER, 21

AC921

PAD DRIVER, 21" PAD DRIVER VERSA PRO FLOOR MACHINE
For Bonnet Cleaning and VCT Floor Care

Match the pad driver to the apron you'd like touse for the job. Then add the appropriate bonnet or floor pad for the job.

AC913 - 13" Pad Driver
AC913 - 15" Pad Driver
AC913 - 17" Pad Driver
AC913 - 19" Pad Driver
AC913 - 21" Pad Driver

APRON WITH BUMPER 21

AC921A

APRON WITH BUMPER 21" VERSA PRO FLOOR MACHINE
he Key to the VersaPro’s Versatility!

The key to the VersaPro’s ingenuity is the different apron sizes offered. Rather than buy one rotary machine in each size, all you have to do is a simple change of the apron on the VersaPro to get the cleaning path that you need for the job. All aprons come with non-marking full wrap bumpers.


AC913 - 13" Apron with Bumper
AC913 - 15" Apron with Bumper
AC913 - 17" Apron with Bumper
AC913 - 19" Apron with Bumper
AC913 - 21" Apron with Bumper

BRUSH 19

AC921B

BRUSH 19" CARPET DELUX W/PLATE FITS 21" MACHINE
This 19-inch carpet brush fits the 21-inch head for VersaPro. The clutch plate is included. This brush lasts longer than average machine brushes because it has an outer row of .028" nylon bristles supporting inner rows of .022" nylon cleaning bristles. That means these bristles resist "permanent bend" longer.

For best results, season this brush for a few minutes on concrete before using it on carpet.

BRUSH 19

AC921C

BRUSH 19" TILE NYLON W/PLATE FOR 21" MACHINE

This 19-inch tile-scrubbing brush fits the 21-inch head for VersaPro. The clutch plate is included. Use this brush for mild to medium aggressive scrubbing of resilient floors, non-slip flooring, terrazzo, quarry tile, and concrete. It has irregular bristle lengths to assure cleaning on uneven surfaces. The bristles are rust-colored .022" DuPont Tynex A nylon fibers impregnated with 120 silicon carbide. This brush replaces the old red and blue pads. 5/8" riser included.

 

ROTOVAC POWER EXTRACTION TOOL

MR02

ROTOVAC POWER EXTRACTION TOOL
Rotovac Powerwand

Power Extraction Cleaning With One Hand

The Rotovac Powerwand replaces the manual scrub wand for extraction carpet cleaning. Combining rotary agitation with hot water extraction, the Rotovac cleans better, leaves the carpet drier and is much easier to use than a wand.

A person with a manual scrub wand can only make around 60 two directional cleaning passes per minute. As the person tires this number decreases, along with the quality.

With its intensive, aggressive cleaning action, the Rotovac restores heavily soiled carpets and matted traffic areas with ease.

Works With Any Truckmount or Portable System

The Rotovac is airflow calibrated and high pressure plumbed to operate with everything from small portable extractors, to the largest most powerful truck mount systems.

Rotovac 360

MR03

Rotovac 360
Rotovac 360

Power Extraction Cleaning With One Hand

The Rotovac 360 replaces the manual scrub wand for extraction carpet cleaning. Combining rotary agitation with hot water extraction, the Rotovac cleans better, leaves the carpet drier and is much easier to use than a wand.

The Rotovac 360 is a Rotary Extraction Power Head that utilizes rotary vacuum heads and spray jets to thoroughly deep clean carpets with hundreds of multi-directional cleaning passes. The 360 is extremely user friendly as it operates in a self propelled "side to side" motion and weighs only 39 lbs. The telescoping handle adjusts down for cleaning stairs and compact storage.

Works With Any Truckmount or Portable System

The Rotovac is airflow calibrated and high pressure plumbed to operate with everything from small portable extractors, to the largest most powerful truck mount systems.

BONNET 17

AC85

BONNET 17" FULL
These heavy-duty full bonnets give the great absorbency and aggression of 100% cotton. Great for drying carpet as a last cleaning step or used as a primary cleaning bonnet.
BONNET 21

AC86

BONNET 21" FULL
These heavy-duty full bonnets give the great absorbency and aggression of 100% cotton. Great for drying carpet as a last cleaning step or used as a primary cleaning bonnet.
BONNET 17

AC87

BONNET 17" SPEEDTREK
These low profile bonnets have scrubbing strips of polypropylene designed to aggressively clean the dirtiest carpet. The highly absorbent synthetic fiber will draw up moisture and soil and can be repeatedly laundered.
BONNET MICROFIBER 17.5

AC88

BONNET MICROFIBER 17.5"
Microfiber bonnets are multipurpose for carpet and hard surfaces where mild abrasion and superior absorptions are desired. This microfiber is positively charged and split into 17 strands which has amazing pulling power for soil. The bonnet absorbs and holds more soil. Great as a last step cleaning and drying step for commercial carpet and for cleaning hardwood floors.
BONNET 21

AC89

BONNET 21" SPEEDTREK
These low profile bonnets have scrubbing strips of polypropylene designed to aggressively clean the dirtiest carpet. The highly absorbent synthetic fiber will draw up moisture and soil and can be repeatedly laundered.
DRIVE BLOCK FOR 17

AC90

DRIVE BLOCK FOR 17" ROTARY FLOOR MACHINE
16" Perma grip poly drive block to fit a 17" Rotary Machine (MH44).
19.5

AC92

19.5" Microfiber Bonnet
Microfiber bonnets are multipurpose for carpet and hard surfaces where mild abrasion and superior absorptions are desired. This microfiber is positively charged and split into 17 strands which has amazing pulling power for soil. The bonnet absorbs and holds more soil. Great as a last step cleaning and drying step for commercial carpet and for cleaning hardwood floors.
4 GALLON SHAMPOO TANK

AC96

4 GALLON SHAMPOO TANK
4-Gallon shampoo tank for the MH44 Rotary Machine. 

Accessories - Chemicals - Cleaning - Hard Surface - Portables - Restoration - Sprayers - Wands / Tools

 
Home - Contact Us
 
©2011 Emerald Coast Restoration Supply, LLC
3004 Minnesota Avenue
Lynn Haven, FL 32444
(850)563-2104 Fax (850)563-1695